How to lay fake grass on grass

Introduction

Tired of the hassle of traditional grass? Fake grass offers a low-maintenance, stylish alternative that’s perfect for busy lifestyles. But before you dive into the world of synthetic turf, it’s crucial to lay a solid foundation. This guide will walk you through the process of installing fake grass over your existing lawn, ensuring a beautiful and long-lasting result.

Preparing Your Lawn for Fake Grass

Clear the Existing Lawn

The first step is to remove your existing grass. A turf cutter is the most efficient tool for this job, ensuring a completely grass-free surface.

Weed Control and Drainage

Before laying down your fake grass, it’s essential to eliminate any weeds and ensure proper drainage. Apply a generous dose of weed killer to prevent unwanted growth. Check your area for any underground utilities and ensure adequate drainage to prevent waterlogging.

Laying the Foundation

Weed Membrane: A weed membrane acts as a barrier, preventing weeds from growing through your new turf.
Aggregate Base: A layer of type 1 aggregate provides a stable and level base for your fake grass. Compact it thoroughly with a wacker plate.
Sand Leveling: Apply a layer of sharp sand to even out the aggregate base. Use a screed bar to ensure a smooth and consistent surface.

Installing Your Fake Grass

Underlay Installation

Choose a Dry Day: Ensure your base is completely dry before starting.
Roll Out the Underlay: Start at one end of the area and ensure the underlay rolls up against the edge of your surround. Cut it to the desired shape.
Jointing Tape: Use jointing tape to connect any separate pieces of underlay. Secure them with tacks every 10-20cm.

Laying the Fake Grass

Estender a relva: Unroll your fake grass onto the prepared area, leaving 5cm extra around all edges for trimming.
Allow for Settling: Give the grass 2-3 hours to settle and flatten out. This will minimize wrinkles.
Cutting to Size: Once settled, trim the grass to the desired shape. Use the underside of the grass to cut, following the stitch lines.

Joining Fake Grass (Large Areas)

Align the Pieces: Ensure the piles of each piece run in the same direction.
Fold and Cut: Fold the edges back about 25cm and cut 2-3 stitch lines on each edge.
Jointing Tape: Apply jointing tape to the seam, ensuring even pressure for a strong bond.

Attaching the Fake Grass

Glue Application: Apply glue to the perimeter of the underlay. Work quickly, as the glue has a limited working time.
Bonding Time: Allow the fake grass and underlay to bond for at least two hours before walking on it.

Sanding and Brushing

Infill with Sand: Infill the fake grass with kiln-dried sand. This helps secure the turf and prevents wrinkles.
Brush for Texture: Use a stiff brush or motorised broom to brush the sand into the fibers, creating a uniform look.

Maintaining Your Fake Grass

1. Regular Brushing: Brush your fake grass regularly with a stiff brush or plastic rake to maintain its appearance.

2. Debris Removal: Remove debris with a leaf blower, broom, or leaf rake. Wash away any spills with water.

3. Furniture Placement: Be mindful of heavy furniture and children’s play equipment. Spread the weight evenly to prevent indentations.

4. Heat Protection: Avoid placing hot objects or barbeques on your fake grass.

Perguntas mais frequentes

Q: How long does it take to install fake grass?

A: The installation time depends on the size of your lawn and the complexity of the project. A small lawn might take a few hours, while a larger area could take a full day.

Q: Can I install fake grass myself?

A: Yes, installing fake grass is achievable with the right tools and preparation. However, it’s recommended to consult with a professional if you’re unsure about any aspect of the process.

Q: What type of sand should I use for infilling?

A: Opt for weed-free sand for a long-lasting and weed-free lawn.